The Intel AMT > Power task in Remote Support allows users to connect to remote systems running on Intel vPro hardware that supports the AMT KVM feature. For this to work, enable the AMT KVM feature on your vPro hardware.
To configure Intel vPro hosts for AMT KVM connections:
Reboot the host, and then enter its BIOS configuration menu.
Under AMT Options, select the following options:
AMT Setup Prompt
Reboot the host, and then enter the Management Engine BIOS Extension (MBEx): Just after the BIOS startup screen, press Ctrl+P.
If you are prompted for a password, enter the default password, admin, and then create a new password.
In the Intel ME Platform Configuration menu, select Activate Network Access.
In the Intel ME Network Setup menu, select Intel ME Network Name Settings.
Select Host Name, and then enter the hostname for the host.
Press Esc to return to the previous menu.
Select Manageability Feature Selection, and then ensure it is enabled in the lower pane.
In the SOL/IDER menu, enable the following options:
Legacy Redirection Mode
Return to the previous menu, and then select KVM Configuration.
In the KVM Configuration menu, select KVM Feature Selection, and then ensure it is enabled in the lower pane.
In the upper pane, select User Opt-in, and then select User Consent is required for KVM Session in the lower pane.
In the upper pane, select Opt-in Configurable from remote IT, and then select Enable Remote Control of KVM Opt-In Policy in the lower pane.
Press Esc until you are prompted to leave the MEBx menu.